• Clean from the center
of
the disc and move
outward.
• When removing discs from this unit, pull
them
out
horizontally.
If the disc center hole or outside rim
has
burrs,
use the disc
only
after removing the burrs
with
a
ballpoint pen
etc
Discs
that
cannot be used
Discs
that
are
not
round cannot be
used.
•
Discs
with coloring on the recording surface or
discs that are
dirty
cannot be used.
•
This
unit
can
only play the
CDs
with
~m
This unit may
not
correctly play discs which
do
not
have the mark.
•
You
cannot
playa
CD-R
or
CD-RW that
has
not
been finalized.
(For
the finalization process refer to
your CD-R/CD-RW writing software, and your
CD-
R/CD-RW recorder instruction manual.)
• If you try to load a 3-inch-disc
with
its
adapter into
the unit, the adapter
might
separate from the disc
and damage the unit.
Other notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with
your Kenwood dealer
to
make
sure
that
they
work
with
your model and
in
your
area.
• The characters conforming
to
ISO
8859-1
character
set can be displayed.
• The
RDS
or
RBDS
feature
won't
work where the
service
is
not
supported by any broadcasting
station.
n
~
II
I I
KENWOOD)
IJ
~)I
[~[C=~~~==========:::::::===::==
['0~~
~.
ir .
~
(1--1
~."
'-=1:=J~~~b~~~
Reset
button
Cleaning
the
Unit
If the faceplate
of
this unit
is
stained,
wipe
it with a
dry soft cloth such
as
a silicon cloth.
If the faceplate
is
stained badly, wipe the stain
off
with
a cloth moistened
with
neutral cleaner, then
wipe it again
with
a clean soft dry cloth.
To
prevent injury or fire, take
the
following
precautions:
·
To
prevent a short circuit, never
put
or
leave any
metallic objects (such
as
coins or metal tools) inside
the unit.
• Do
not
watch or fix your eyes on the unit's display
when you
are
driving for any extended period.
How to reset your unit
• If the unit or the connected unit fails
to
operate
properly, press the
Reset
button. The unit returns
to
factory settings when the
Reset
button
is
pressed.
Remove the
USB
device before pressing the
Reset
button. Pressing the
Reset
button
with
the
USB
device installed can damage the data contained
in
the
USB
device.
For
how
to remove the
USB
device,
see
<Playing a
USB
device> (page
12)
~
• Applying spray cleaner directly to
the
unit
may affect its
mechanical parts. Wiping
the
faceplate
with
a hard cloth
or using a volatile liquid such
as
thinner
or alcohol may
scratch
the
surface or erases characters.
lens
Fogging
When you turn on the car heater in cold weather,
dew
or condensation may form on the lens
in
the
disc player
of
the unit. Called lens fogging, this
condensation on the lens may
not
allow discs
to
play.
In
such a situation, remove the disc and wait for the
condensation
to
evaporate. If the unit still does
not
operate normally after a while, consult your Kenwood
dealer.
Handling
discs
• Do
not
touch the recording surface
of
the
disc
• Do
not
stick tape
etc
on the disc, or
use
a disc
with
tape stuck on
it.
• Do
not
use disc type accessories.
This
product
includes a non-replaceable
lamp
that
contains trace amounts
of
mercury.
Please
recycle in accordance
with
your local state regulations. Do
not
dispose
of
in trash.
For disposal
or
recycling information,
please
contact
your local authorities.
4 KVT-696/KVT-636DVD/KVT-516/KVT-546DVD
To Next Page
Loading...
Need help?
General
