12
Q Transmitting
If programmed by your dealer, you can press the Call 1 ~ Call 3 keys to
quickly send preprogrammed status messages. You can also manually send
status messages.
1 Select your desired zone and channel.
2 Press the key programmed as Status or Selcall + Status.
• When pressing the StatusNH\WKHWDUJHW)OHHW,'LVÀ[HGDQGFDQQRWEH
selected. Skip to step 5 to continue.
3 In Selcall mode, press / to select the ID of the station you want to call.
• You can also enter the station ID directly by using the keypad.
4 Press S to enter Status mode.
5 Press
/ to select the status ID you want to transmit.
• You can also enter the status ID directly by using the keypad.
6 Press the PTT switch or Q to initiate the status call.
Q Receiving
:KHQDVWDWXVFDOOLVUHFHLYHGWKH;;LFRQZLOOÁDVKDQGWKHFDOOLQJ,'RU
text message will appear on the display. Press any key to return to normal
operation.
Q Reviewing Messages in the Stack
1 Press the key programmed as Stack or press and hold the key
programmed as Selcall, Status, or Selcall + Status.
2 Press
/ to select your desired message.
3 Press Q to return to normal operation.
SHORT/LONG MESSAGES
To send and receive short or long messages, connect the transceiver to a PC.
(Ask your dealer for details.)
• Short messages can contain a maximum of 48 characters. Received short messages
are displayed the same as Status messages and are stored in the same stack memory.
A combined maximum of 15 Status calls and short messages can be stored in the stack
memory.
• Long messages can contain a maximum of 4096 characters and can only be viewed via
a PC.
You can also send short messages directly from the transceiver, without the use
of a PC.
1 Select your desired zone and channel.
2 Press the key programmed as Short Message or Selcall + Short Message.
• When pressing the Short MessageNH\WKHWDUJHW)OHHW,'LVÀ[HGDQGFDQQRWEH
selected. Skip to step 5 to continue.
To Next Page
Loading...
Need help?
General
