5.6.3 Stability indication
Stable
Unstable
The balance is in a stable condition if the [ο] stability indication appears on the dis-
play. The [ο] indication disappears if the condition is unstable. Stable ambient condi-
tions can be achieved by using the draft shield (See chap. 5.2.4 for installation)
5.6.4 Zero display on the balance
Environmental influences can lead to the exact figure of “0.000“ not being displayed
in spite of an empty weighing dish. It is, however, possible to reset your balance to
zero at any time and thus ensure that weighing really does commence at zero. Set-
ting to zero when a weight is applied is only possible within a certain type-dependent
range. In the event that the balance cannot be reset to zero with an applied weight,
this range has been exceeded.
[o - Err ] will appear on the display.
Operation Display
the balance in spite of the weighing dish be-
ing empty, press the key and the balance
will start resetting to zero.
To Next Page
Loading...
Need help?
General
