balance to the WEIGH position.
Calibration is now finalised.
The balance will automatically return to weigh-
ing mode.
5.8.3 Adjusting with external weight (only KERN EW and EWB)
Carry out adjustment with the recommended adjusting weight (see Chapter 1 „Tech-
nical Data“). The adjustment can also be carried out with different adjusting weights
(see table), but not ideal from a metrological point of view. Information concerning
the adjusting weights is available at: http://www.kern-sohn.com
Model Alternative adjusting weight
To Next Page
Loading...
Need help?
General
