7.2.2 Parameters for the serial interface
(excl. EWB models)
Description of the choice pos-
Output format at inter-
face
Output condition at
interface
(Menu setting “7 I.F. [1] or
1 Continuous serial output.
2 Continuous serial output upon
3 Output following printing of
4 Automatic output upon stable
weighing value. The first value to
stabilise is adopted if this is -0.00
or
less. No new output until weight
is removed and a new load ap-
5 Output upon stabilisation, no out-
6 Output upon stabilisation, con-
stant output if data unstable.
☆7 Output following printing of
To Next Page
Loading...
Need help?
General
