6.1.2 Overview of display
Unit counter display (excl. EW 120-4NM)
Percent weighing display (excl. EW 120-4NM)
Tolerance weighing display (excl. EW 120-4NM)
Balance carry out balance function, e.g. unit count / display of
stored value
Calibration display. Signalises calibration procedure.
upper right) Tael (Singapore,Malaysia)
lower right) Tael (Taiwan)
Rechargeable battery mode (optional).
[ ] Display changes to mains-
powered mode if the voltage falls
below the prescribed minimum.