1 Technical data
KERN EG 220-3NM EG 420-3NM EG 620-3NM
Readout 0,001 g 0,001 g 0,001 g
Verification value (e) 0,01 g 0,01 g 0,01 g
Weighing range (max.) 220 g 420 g 620 g
Class of accuracy II II I
Taring range (subtractive) 220g 420 g 620 g
Minimum load (Min) 0,02 g 0,02 g 0,1 g
Minimum weight for count-
ing parts
0,001 g 0,001 g 0,001 g
Reference quantity 10, 30, 50, 100 10, 30, 50, 100 10, 30, 50, 100
Reproducibility 0,001 g 0,001 g 0,001 g
Linearity ± 0,002 g ± 0,003 g ± 0,004 g
Adjusting weight internal internal internal
Stabilization time 3 sec. 3 sec. 3 sec.
Weighing plate stainless
steel
Ø 118 mm Ø 118 mm Ø 118 mm
Weight kg (net) 2,0 2,0 2,0
verification switch not in
verification position,
(chap. 5.10)
g, ct, oz, lb, ozt, dwt, GN, tl (HongKong), tl (Taiwan),
tl (Singapore, Malaysia), momme, tola
Air humidity max. 80 % relative (not condensing)
Permissible ambient
condition
10° C to 30° C
Balance dimensions 235 x 180 x 75 mm (excluding draft shield)
235 x 185 x 165 mm (including draft shield)
Vibratory filter 4
Mains supply
To Next Page
Loading...
Need help?
General
