1-4 Electronic Calibration Modules Reference Guide
General Information
Models and Options
1-
Models and Options
This section provides the model number, operating characteristics and
connector options available with Keysight RF and microwave ECal modules.
You can order ECal modules by selecting the model number followed by the
desired options.
N755xA Modules (RF Two-Port)
ECal modules from this series are available with the connector types and
frequency ranges shown in Table 1-1 on page 1-6. Mixed connector options
allow you to configure the module with a different connector type at each port
(as shown in Figure 1-2).
Figure 1-1 Model N755xA Option Type-N m and f shown