Keysight N4693D User Manual

6-2 Electronic Calibration Modules Reference Guide
Replaceable Parts
Type-N (50 ohm) Modules and Accessories
6-
Type-N (50 ohm) Modules and Accessories
Table 6-1 Type-N Modules and Accessories
Description
a
a. See “Clarifying the Terminology of a Connector Interface” on page 1-1.
Qty Part Number
Adapters (added with Option 00A – N469xD only)
Type-N (50 Ω) -f- to -f- adapter
Type-N (50 Ω) -m- to -m- adapter
1
1
85054-60037
85054-60038
Protective End Caps
Type-N f-f connector cap (for module)
b
Type-N m-m connector cap (for module)
b
Type-N f-m connector cap (for module)
b
Type N -f-connector cap (for adapter)
c
Type N -m-connector cap (for adapter)
c
b. Available on the N755xA ECals only.
c. These items are not included, but can be ordered separately.
1
1
1
1
1
N7550-40004
N7550-40006
N7550-40005
1401-0225
1401-0214
Gages
b
Type-N pin depth gages (-m- and -f- gages and masters) 1 set 85054-60049
Other
Electronic calibration module reference manual (online)
USB cable A to B 2 meter
1/2 in to 9/16 in open-ended wrench
c
3/4 in, 135 N-cm (12 in-lb) torque wrench
c
Ruggedized plastic storage box for the ECal module and accessories
(Option 150)
b
Replacement ruggedized plastic storage box for the ECal module and
accessories
d
d. This item is included, but a replacement can be ordered separately.
1
1
1
1
1
1
N7550-90002
8121-2671
8710-1770
8710-1766
N7550-60009 – Refer
to Table 4-2,
“N755xA Option
150 Storage Box
Part Numbers”, on
page 4-23.
1540-2345 – Refer to
Table 1-4,
“N469xD
Modules”, on
page 1-13.

Keysight N4693D Specifications

General

Brand	Keysight
Model	N4693D
Category	Control Unit
Language	English