Electronic Calibration Modules Reference Guide 2-5
Preparing ECal for Use
Kit Contents
N4431D Series Kit Contents
The following tables list the items in each N4431D kit. For the N4431D kit,
Option 010 is configured with 3.5 mm -f- connectors on all ports and Option
020 is configured with type-N 50 ohm -f- connectors on all ports. See
Table 1-3 on page 1-9 for other configurations available.
Table 2-3 N4431D Kit Contents
Qty Description Part No.
N4431D Option 010
1 N4431D, ECal Module --
1 Calibration certificate 5962-0476
1 Wrench spanner 08513–20014
1 Wrench–Torque 8 in-lb, 20 mm open end 8710-1764
1 Wrench–Torque 8 in-lb, 5/16 in open end 8710-1765
1 USB A-plug to micro-B plug Cable, 2 m 8121-2671
1 QuickStart Guide N4431-90004
Table 2-4 N4431D Kit Contents
Qty Description Part No.
N4431D Option 020
1 N4431D, ECal Module --
1 Calibration certificate 5962-0476
1 Wrench–Torque 8 in-lb, 3/4 in open end 8710-1766
1 USB A-plug to micro-B plug Cable, 2 m 8121-2671
1 QuickStart Guide N4431-90004
Table 2-5 N4431D Kit Contents
Qty Description Part No.
N4431D Mixed Connector Options
a
a. Torque wrench varies with options.
1 N4431D, ECal Module --
1 Calibration certificate 5962-0476
1 USB A-plug to micro-B plug Cable, 2 m 8121-2671
1 QuickStart Guide N4431-90004
To Next Page
Loading...
Need help?
General
