1 To drain the used oil, remove the
right and left drain plugs and lling
plug at the front axle case and drain
the oil completely into the oil pan.
2. After draining reinstall the drain
plugs.
3. Remove the oil filler plug and oil
level check plug. (commonly shared
component)
4. Add new oil to the specied level of
the check plug through the oil ller.
(Refer to “Lubrication” in the chap-
ter “Service”)
5. Tighten the oil filler plug and oil
check plug after replenishment.
6. Check the oil level after 15 minutes
and add oil as necessary.
(1) Oil Check Plug
M46O745A
Oil capacity
0.53 U.S.gal. (2.0 L)
(1) Brake Pedal
(A) Free Play
ADJUSTING BRAKE PEDAL (O)
tb3O709A
Using the brake pedal for an extend-
ed period of time causes it to play.
This may lead to deterioration of the
braking performance and malfunction
of the braking system.
The brake pedal can be adjusted as
follows:
1. Release the parking brake.
2. Slightly depress the pedals and
measure the free travel at the top
of the pedal stroke.
To Next Page
Loading...
Need help?
General
