7
kobalttools.com
TOOL MAINTENANCE
• Maintain all tools in peak condition. Keep tool clean for best and safest performance. Follow
instructions for changing accessories.
• Keep tool and its handle dry, clean, and free from oil and grease. ALWAYS use a clean cloth when
cleaning. NEVER use brake uids, gasoline, petroleum-based products, or any strong solvents to
clean your tool.
SERVICE
• All repairs and tool servicing other than routine maintenance as described above must be performed
only by qualied repair personnel, using only identical replacement parts.
SAVE THESE INSTRUCTIONS
• Refer to them frequently.
• Use to instruct others who may use the tool.
• If tool is loaned to someone, also loan them these instructions.
SAFETY INFORMATION
PREPARATION
Before beginning operation of product, make sure all parts are present and tool is not visibly
damaged. If damaged or parts are missing, please contact 1-888-356-2258 for a missing parts
request.
WARNING
• DO NOT use the product if parts are missing. Use of damaged or incomplete products could result
in serious personal injury.
• ALWAYS wear safety goggles or safety glasses with side shields during power tool operation. If
work area is dusty, also wear a dust mask.
• Disconnect tool from air supply before leaving the work area, moving the tool to another location, or
handing the tool to another person. Failure to do so could result in serious personal injury.
To Next Page
Loading...
Need help?
General
