.
ATTACHMENTS, OPTIONS
REVO TACHOGRAPH (TCO 15-7)
SPEED INDICATOR
This (4) indicates the machine travel speed.
SPEED WARNING LAMP
When the machine exceeds the maximum set speed, the lamp (5) lights up to warn the operator.
Models with the speed warning lamp do not have the speed indication confirmation lamp.
SPEED INDICATION CONFIRMATION LAMP
This lamp (6) is interconnected with the speedometer and is used to confirm the speed indication. When using the
confirmation switch to light up the confirmation lamp during checks before starting, always check for any
disconnection in the three indication confirmation lamps.
Models with the speed warning lamp do not have the speed indication confirmation lamp.
ODOMETER
This meter (7) displays the total distance (km) traveled by the machine.
PERIOD INDICATING LABEL
This (8) indicates that it is for 7 days.
RPM SCALE
This (9) is the scale for the momentary speed in revolutions per minute (rpm).
RPM INDICATOR
This (10) shows the momentary speed in revolutions per minute (rpm).
SPEED RECORDING STYLUS
This (11) records the momentary speed of the machine on the chart.
TRAVEL DISTANCE RECORDING STYLUS
This (12) records the distance travel by the machine on the chart. One up-and-down recording motion is 10 km.
ADJUSTMENT SCREW FOR SPEED WARNING LAMP
The speed at which the lamp gives a warning can be set as desired with this screw (13).
SPEED CONFIRMATION APERTURE FOR SPEED WARNING LAMP INDICATION
This (14) is the speed indication aperture for setting the desired speed.
CLOCK SETTING KNOB
Turn this knob (15) clockwise to advance the hand, and counterclockwise to turn the hand back.
CHART SUPPORT
This (16) is the rotating part of the clock and has teeth to prevent the chart from slipping.
PRESSING RING
This ring (17) is a ring that presses the chart and holds it against the chart support.
CUTTING KNIFE
This knife (18) cuts the tape connecting the charts.
6 - 18
To Next Page
Loading...
Need help?
General
