AUTO KICK DOWN SETTING
When the shift
mode is set to the digging mode automatically,
auto-kickdown shifts the gear speed to 1st automatically and
eliminates operator's operation.
1.
Select “Auto Kick Down Setting” on “Machine Setting and
Information” menu, then press ENTER switch (1).
2.
Select “ON/OFF”, then press ENTER switch (1).
REMARK
For the detail of the gear speed, see “GEAR SPEED
SWITCH (3-107)”.
TRIP METER
The overall travel distance after the previous resetting can be
checked by using the “Trip Meter”.
You can reset the travel distance according to the following pro-
cedure.
1.
Select “Trip Meter” on “Machine Setting and Information”
menu, then press ENTER switch (1).
OPERATION EXPLANATION OF COMPONENTS
3-71
To Next Page
Loading...
Need help?
General
