INTRODUCTION
MAIN USE OF MACHINE
This Komatsu machine is designed to be used mainly for the following work:
•
Digging work
•
Leveling work
•
Dozing work
• Loading work
For details of the work procedure, see “RECOMMENDED APPLICATIONS (3-208)”.
DIRECTIONS OF MACHINE
(A) Front
(B) Rear
(C) Left
(D) Right
(E) Bucket
(F) Operator's seat
In this manual, the directions of the machine (front, rear, left, right) are determined according to the view from
the operator's seat in the direction of travel (front) of the machine.
VISIBILITY FROM OPERATOR'S SEA
T
This machine complies with the visibility standard (ISO5006).
This machine maintains a proximity visibility of a height of 1.5 m at a point
1 m away from the outside surface of
the machine, and a visibility for a radius of 12 m.
Protective structures
This machine is equipped with a structure to protect the operator (ROPS) conforming to ISO3471.
INTRODUCTION FOREWORD
1-6
To Next Page
Loading...
Need help?
General
