1.
Select “Lockup Setting
with Starting SW ON” from “Ma-
chine Setting and Information” menu screen, then press
ENTER switch (1).
2.
Select “Lockup Setting with Starting SW ON” mode, then
press ENTER switch (1).
The following 3 items can be selected.
• “ON Start”: Lockup
function is ON when starting
switch is turned to ON position
• “OFF Start”: Lockup function is OFF when starting
switch is turned to ON position
• “Last Setting”: “ON/OFF” state when starting switch is
turned to OFF position previous time is selected when
starting switch is turned to ON position
The default is “ON Start”.
AFTERTREATMENT DEVICES REGENERATION
Each item of “Aftertreatment Devices Regeneration” menu (C)
is for settings and operations of the aftertreatment devices re-
generation.
For details of the aftertreatment devices regeneration, see
“HANDLE Komatsu Diesel Particulate Filter (KDPF) (3-133)”.
The operation methods and the contents of the display of
KDPF regeneration and urea SCR regeneration are common.
EXPLANATION OF COMPONENTS OPERATION
3-74
To Next Page
Loading...
Need help?
General
