8
White Calibration Plate CM-A139
Used to perform white calibration for measurement
of reflectance and to perform measurement
of transmittance. A CD-ROM containing white
calibration data and software for writing the white
calibration data are supplied with this accessory.
Target Mask CM-A105
CM-A106
CM-A107
Used to change the illumination area (measurement
aperture) according to the specimen.
Measurement and illumination (aperture area at specimen
surface) areas for each target mask are as follows:
CM-A105（LAV）: ø25.4 mm /ø30 mm
CM-A106（MAV）: ø8 mm /ø11 mm
CM-A107（SAV）: ø4 mm /ø7 mm
Zero Calibration Box CM-A104
Used to perform zero calibration for measurement
of reflectance and to perform haze measurement
at measurement of transmittance.
AC Adapter AC-A308
Used to supply power from an AC
outlet to the CM-3600A.
Input: 100 to 240 V 50/60 Hz
Output: 8 V 1.5 A
Plug design: Center-negative
USB Cable (3 m) IF-A21
Used to connect the instrument to
a personal computer (PC).
Accessory Case CM-A215
Dust Cover CM-A110
Standard Accessories
To Next Page
Loading...
Need help?
General
