18 GETTING UP AND RUNNING
INSTALLING AND REMOVING A MEMORY CARD
An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera
to operate. If a card has not been inserted, a no-card warning appears on the LCD
monitor; the shutter can still be released, but no image is captured.
Always turn off the camera and confirm the indicator lamp is not lit before
changing the memory card, otherwise the card may be damaged, and data lost.
1.Slide the card-chamber door toward
the back of the camera to release the
safety catch. Open the door.
2.Insert the memory card all the way
into the card slot and then release.
The card should catch in the slot.
Insert the card so the face is toward
the back of the camera. Always push
the card in straight, never at an
angle. Never force the card. If the
card does not fit, check that it is
orientated correctly. If a
MultiMediaCard is inserted
incorrectly, it will lock, but the card
chamber door will not close.
3.To eject a memory card, press the
card into the slot and release. The
card can now be pulled out.
4.Close the card-chamber door and
slide it toward the camera to engage
the safety catch.
1
2
3
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
