Konica Minolta DiMAGE X50 User Manual

22 RECORDING - BASIC OPERATION
LCD MONITOR DISPLAY
If the shutter speed falls below the point where the camera can be
hand held safely, the camera-shake warning indicator will appear
on the monitor and the viewfinder indicator lamp will turn orange
and blink slowly. Camera shake is slight blurring caused by subtle
hand motion and is more pronounced at the telephoto position of
the lens than at the wide-angle position. Although the warning
appears, the shutter can still be released. If the warning appears,
place the camera on a tripod or use the built-in flash.
CAMERA-SHAKE WARNING
Automatic digital subject program display (p. 25)
Image size (p. 42)
Image quality (p. 42)
Drive mode (p. 37)
Frame counter (p. 43)
Camera-shake warning
Focus signal (p. 27)
Recording mode
Flash modes (p. 28)
Focus frame
Battery-condition indicator (p. 16)

Konica Minolta DiMAGE X50 Specifications

General

Megapixel	5 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Maximum image resolution	2560 x 1920 pixels
Still image resolution(s)	1600 x 1200, 2048 x 1536, 2560 x 1920
Digital zoom	4.3 x
Optical zoom	12 x
Focal length range	6.1 - 17.1 mm
Metering	Multi-segment (256 segments) / Spot
Interface	USB, Exif Print, PRINT Image Matching II
Built-in flash	Yes
Camera shutter speed	4 - 1/1000 s
Focal length (35mm film equivalent)	37 - 105 mm
Compatible memory cards	mmc, sd
Display diagonal	2 \
I/O ports	USB NTSC/PAL
Bundled software	DiMAGE Viewer
Camera playback	Slide show
Self-timer delay	10 s
Motion JPEG frame rate	15 fps
Maximum video resolution	320 x 240 pixels
Product color	Silver
Battery type	NP-700
ISO sensitivity	50, 100, 200
Flash modes	Red-eye reduction
Focus adjustment	Auto

Weight and Dimensions

Depth	23.5 mm
Width	83.5 mm
Height	62 mm
Weight	125 g