Voice memo allows an audio track up to fifteen
second to be recorded with a still image. The
function is activated in section 3 of the recording
menu (p. 40). When the function is active, the
microphone indicator (1) is displayed in the top
left corner of the monitor. The voice memo must
be set before taking a picture. It remains in effect
until reset.
After an image is captured, a screen appears
indicating the audio recording has started. A bar
graph displays the amount of recording time
elapsed.
To stop the recording, press the shutter-release
button or the center button of the controller (2).
The recording will stop automatically when the
fifteen-second limit has elapsed.
A voice memo is attached to the last image of a
continuous-advance series (p. 37). When played
back, images with voice-memo audio tracks have
a note indicator displayed with them (p. 54). A
voice memo can be deleted from an image in
section 1 of the playback menu (p. 56).
VOICE MEMO
Remaining recording time
When making audio recordings, be careful not to touch or
cover the microphone. The quality of the recording is
proportional to the subject to microphone distance. For best
results, hold the camera approximately 20cm (8in) from your
mouth.
Camera Notes
Recording audio.
Stop
2
Microphone
49
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
