Konica Minolta DiMAGE X50 User Manual

81
CONNECTING TO WINDOWS 98 AND 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows operating systems.
Before connecting the camera to the
computer, place the DiMAGE Viewer
CD-ROM in the CD-ROM drive. The
DiMAGE installer menu should
automatically activate. To
automatically install the Windows 98
USB driver, click on the “Starting up
the USB device driver installer”
button. A window appears to confirm
that the driver should be installed;
click “Yes” to continue.
Automatic Installation
A message appears when the driver
has been successfully installed. Click
“OK.” Restart the computer before
connecting the camera (p. 80).

Konica Minolta DiMAGE X50 Specifications

General

Megapixel	5 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Maximum image resolution	2560 x 1920 pixels
Still image resolution(s)	1600 x 1200, 2048 x 1536, 2560 x 1920
Digital zoom	4.3 x
Optical zoom	12 x
Focal length range	6.1 - 17.1 mm
Metering	Multi-segment (256 segments) / Spot
Interface	USB, Exif Print, PRINT Image Matching II
Built-in flash	Yes
Camera shutter speed	4 - 1/1000 s
Focal length (35mm film equivalent)	37 - 105 mm
Compatible memory cards	mmc, sd
Display diagonal	2 \
I/O ports	USB NTSC/PAL
Bundled software	DiMAGE Viewer
Camera playback	Slide show
Self-timer delay	10 s
Motion JPEG frame rate	15 fps
Maximum video resolution	320 x 240 pixels
Product color	Silver
Battery type	NP-700
ISO sensitivity	50, 100, 200
Flash modes	Red-eye reduction
Focus adjustment	Auto

Weight and Dimensions

Depth	23.5 mm
Width	83.5 mm
Height	62 mm
Weight	125 g