Konica Minolta DiMAGE X50 User Manual

83
The add new hardware wizard will confirm the
location of the driver. The letter designating the CD-
ROM drive will vary between computers. Click “Next”
to install the driver in the system.
One of three drivers may be located:
MNLVENUM.inf, USBPDR.inf, or USBSTRG.inf.
The last window confirms the driver has been
installed. Click “Finish” to close the add new
hardware wizard. Restart the computer.
When the my-computer window is opened, a new
removable-disk icon is displayed. Double click on the
icon to access the camera’s memory card; see page
84.

Konica Minolta DiMAGE X50 Specifications

General

Megapixel	5 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Maximum image resolution	2560 x 1920 pixels
Still image resolution(s)	1600 x 1200, 2048 x 1536, 2560 x 1920
Digital zoom	4.3 x
Optical zoom	12 x
Focal length range	6.1 - 17.1 mm
Metering	Multi-segment (256 segments) / Spot
Interface	USB, Exif Print, PRINT Image Matching II
Built-in flash	Yes
Camera shutter speed	4 - 1/1000 s
Focal length (35mm film equivalent)	37 - 105 mm
Compatible memory cards	mmc, sd
Display diagonal	2 \
I/O ports	USB NTSC/PAL
Bundled software	DiMAGE Viewer
Camera playback	Slide show
Self-timer delay	10 s
Motion JPEG frame rate	15 fps
Maximum video resolution	320 x 240 pixels
Product color	Silver
Battery type	NP-700
ISO sensitivity	50, 100, 200
Flash modes	Red-eye reduction
Focus adjustment	Auto

Weight and Dimensions

Depth	23.5 mm
Width	83.5 mm
Height	62 mm
Weight	125 g