Konica Minolta DiMAGE Z2 User Manual

114
A
PPENDIX
Problem Symptom Cause Solution
The camera
will not work.
Nothing dis-
played on the
monitors.
The batteries are dead.
AA Ni-MH batteries are
inserted incorrectly.
The AC adapter is not
connected properly.
Replace batteries (p. 13).
Reinsert the batteries taking
care that the negative and
positive terminals are oriented
as indicated on the inside of
the battery chamber door (p.
13).
Check that the adapter is con-
nected to the camera and a
live electrical outlet (p. 15).
The section covers minor problems with basic camera operation. For major problems or damage, or
if a problem continues to reoccur frequently, contact a Konica Minolta service facility.
Shutter will
not release.
“000” is dis-
played on the
frame counter.
Memory card is full and
unable to store an image
at the image-quality or
image-size setting on the
camera.
Insert a new memory card (p.
16), delete some images (p.
31), or change the image-qual-
ity or image-size setting (p.
54).
No-card warn-
ing appears on
the monitors.
No memory card in the
camera.
Insert a memory card (p. 16).
APPENDIX
Troubleshooting

Konica Minolta DiMAGE Z2 Specifications

General

Brand	Konica Minolta
Model	DiMAGE Z2
Category	Digital Camera
Language	English