56
A
DVANCED RECORDING
Auto DSP
Automatic Digital Subject Program Selection can be temporarily dis-
abled in the auto-recording menu. When disabled, the program
exposure mode is active. If the camera is turned off, Automatic
Digital Subject Program Selection is activated.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2272x1704
Standard
On
Off
Digital zoom
The digital zoom must be activated separately in the auto-recording, Digital Subject Program, and P,
A, S, and M exposure-mode menus. The digital zoom is activated in section 3 of the P, A, S, and M
exposure-mode menu (p. 44).
The digital zoom extends the power of the telephoto position of the optical zoom by up to 4X in
0.1X increments. The transition between the optical zoom and digital zoom is seamless. When the
digital zoom is active, the image magnification is displayed on the monitor and the focus frames
change to a single focus area. Because of the degree of magnification, the use of a tripod is recom-
mended.
The digital zoom is operated by the zoom
lever (1). Slide the lever right (T) to zoom
in to the telephoto position of the lens.
When the digital zoom activates, the
image magnification will be displayed on
the monitor. Turn the lever left (W) to
zoom out. After zooming, the zoom scale
is displayed briefly. The yellow section
indicates the digital-zoom range.
Digital-zoom images are interpolated to
the set image size. Some loss of quality
may be evident.
Magnification
Zoom scale
1
To Next Page
Loading...
Need help?
General
