92
S
ETUP MENU
Folder name
All recorded images are stored in folders on the memory card. Two folder-name
formats are available in section 2 of the setup menu, standard and date.
Standard folders have an eight character name. The initial folder is named
100KM004. The first three digits are the folder’s serial number, which will increase
by one each time a new folder is created. The next two letters refer to Konica
Minolta, and the last three numbers indicate the camera used; 004 indicates a
DiMAGE Z2.
A date folder name also starts with the three digit serial number and is followed by
one register for the year, two register for the month, and two registers for the day:
101YMMDD. The folder 10140319 was created in 2004 on March 19th.
With the date folder format selected, when an image is recorded, a new folder with
the day’s date is created. All images recorded that day are placed in that folder. Images recorded on
a different day are placed in a new folder with the corresponding date. If the file number memory
function is off (p. 91), when a new folder is created, the serial number in the image-file name is reset
to 0001. If file number memory function is on, the serial number in the image-file is one greater than
the last image saved. For more information on folder organization and file names, see page 102.
100KM004
(Standard)
10140319
(Date)
Noise reduction
This function reduces the affect of dark noise caused by long expo-
sures. Noise reduction is only applied to exposures of one second
or longer. Dark-frame subtraction is applied to each image after it is
captured. The processing time varies from image to image; a mes-
sage will be displayed during this period. Noise reduction can be
turned off in section 2 of the setup menu.
File # memory
Folder name
Date imprint
Off
Std. form
On
–
Off
Date/Time set
Noise reductn
To Next Page
Loading...
Need help?
General
