63
Color Mode
The color mode controls whether a still image is color or black
and white. This must be set before the image is recorded. The
color mode is set in section 3 of the P, A, S, and M menus and
section 2 of the movie menu (p. 44). The live image reflects the
selected color mode. The color mode has no effect on image file
size.
Natural Color reproduces the colors in the scene faithfully. This
mode uses no monitor indicator when active. Vivid Color
increases the saturation of the colors in the scene. Black &
White produces neutral monochrome images. The sepia mode
creates warm-tone monochrome images.
Black & White
Vivid Color
Sepia
Contrast
Contrast: normal
Contrast: low Contrast: high
This function increases or decreases the contrast of the scene in three levels: high (+), normal, and
low (–). This can be set in section 3 of the P, A, S, and M menus (p. 44). Any changes made are
applied to the live image. If any level except normal is selected, an indicator appears on the monitor
as a warning.
To Next Page
Loading...
Need help?
General
