110
Check this: Page
• Battery level too low 19
• Battery inserted incorrectly 19
• AC Adaptor attached incorrectly 22
• Battery level too low 19
• Low ambient temperature 113
• Power supply not on. 23
• SD Memory Card or Memory Stick’s
write protected. 13
• Pictures taken have reached the
maximum number.
→ Erase unwanted pictures. 68,74
• Set to the Self-Timer mode. 40
• Flash being charged. 38
• Subject not in the center 33
• Subject hard to focus 33
• Dirty lens 30
• Incorrect distance from the subject 31
• LCD brightness adjusted incorrectly 46,77
• Finger prints or dirt on the monitor 109
• Set to “Flash off” mode 39
- If the following does not solve your problem, please contact the point of
purchase.
Troubleshooting
Symptom
Power will not turn ON
Power turns OFF right
after turning on
Can’t take a picture
even if pressing the
shutter button
Can’t focus
LCD monitor display
and images are not
clear
Doesn’t Flash
Power
Supply
Shooting
the
pictures
To Next Page
Loading...
Need help?
General
