CE Marking (Declaration of Conformity)
63
WARNING!
The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are
subject to FCC control. Any changes made by the purchaser or user
without first contacting the manufacturer will be subject to penalty
under FCC regulations.
This device must be used with a shielded parallel interface cable and
shielded USB interface cable.
The use of non-shielded cables is likely to result in interference with
radio communications and is prohibited under FCC rules.
CE Marking (Declaration of Conformity)
For European Users
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC, and 93/68/EEC directives.
This declaration is valid for the areas of the European Union (EU) only.
This device must be used with a shielded parallel interface cable and
shielded USB interface cable. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under 89/
336/EEC rules.
CISPR 22 and Local Rules
This device must be used with a shielded parallel interface cable and
shielded USB interface cable.
The use of non-shielded cables is likely to result in interference with radio
communications and is prohibited under CISPR 22 and local rules.
Acoustic Noise
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure level at
the operator position according to EN27779 is equal to or less than 70dB (A).