Safety Information
65
WARNING
• Do not modify this product, as a fire, electrical shock, or
breakdown could result. If the product employs a laser,
the laser beam source could cause blindness.
• Do not attempt to remove the covers and panels which
have been fixed to the product. Some products have a
high-voltage part or a laser beam source inside that could
cause an electrical shock or blindness.
• Only use the power cord supplied in the package. Failure
to use this cord could result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to
do that could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other
appliances or machines. Use of a power outlet for more
than the marked current value could result in a fire or
electrical shock.
• Do not unplug and plug in the power cord with a wet
hand, as an electrical shock could result.
• Plug the power cord all the way into the power outlet.
Failure to do this could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat,
twist, bend, pull on, or damage the power cord. Use of a
damaged power cord (exposed core wire, broken wire,
etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately
turn OFF the power switch, unplug the power cord from
the power outlet, and then call your authorized service
representative.
• In principle, do not use an extension cord. Use of an
extension cord could cause a fire or electrical shock.
Contact your authorized service representative if an
extension cord is required.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
