21 STORAGE 192
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and the exhaust system to rust.
21.2 Preparing for use after storage
401059-01
(Option: Center stand)
– Remove the vehicle from the center stand. ( p. 98)
–
Recharge the battery. x ( p. 153)
–
Install the battery. x ( p. 151)
Info
If the battery was disconnected, the time and date must be set.
– Perform checks and maintenance measures when preparing for use. ( p. 75)
– Take a test ride.
To Next Page
Loading...
Need help?
General
