12 SUSPENSION SETTING 94
S00262-10
–
Turn the white adjusting screw
1
all the way clockwise.
Info
Adjusting screw
1
is located at the upper end of the left fork leg.
The compression damping is located in the left fork leg COMP (white adjusting
screw). The rebound damping is located in the right fork leg REB (red adjusting
screw).
– Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
Comfort 17 clicks
Standard 12 clicks
Sport 7 clicks
Full payload 7 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damping.
12.5 Adjusting the rebound damping of the fork (Option: Without EDS)
Info
The hydraulic rebound damping determines the fork suspension behavior.
To Next Page
Loading...
Need help?
General
