7 COMBINATION INSTRUMENT 43
7.6 Message on the matrix display
401850-01
Possible states
Engine malfunction – The engine control unit has detected a fault. Visit an
authorized KTM workshop.
General message – General message on operating safety. Visit an autho-
rized KTM workshop.
ABS warning – ABS is not available. Visit an authorized KTM workshop.
Traction control – Traction control is not available. Visit an authorized KTM
workshop.
Engine oil pressure – Engine oil pressure is too low. Switch off the engine
immediately. Contact an authorized KTM workshop.
Engine oil level – The engine oil level is too low. Check the engine oil level
and correct it.
Tire air pressure – The tire pressure is incorrect, or the system has failed.
Check the tire pressure.
Lighting system – Lights up if an element of the lighting system has failed.
Change the faulty light, or visit an authorized KTM workshop.
Cooling water temperature – The cooling water temperature is too high.
Switch off the engine. Contact an authorized KTM workshop.
Fuel reserve – The fuel supply is dwindling. Refuel at the next opportunity.
Icy road symbol – The roads may be icy. Adjust your speed to the road con-
ditions.
To Next Page
Loading...
Need help?
General
