12 SUSPENSION SETTING 93
12.3 Fork/shock absorber
S00380-10
(Option: Without EDS)
The fork and the shock absorber offer many options of adapting the suspension to the
riding style and the payload.
Info
The recommendations for the suspension setting are shown in Table
1
. The
table is found on the left inside cover of the fuel tank.
These adjustments are guidelines and should always be the basis for a suspension set-
ting. If the guidelines are not adhered to, the riding characteristics could deteriorate,
particularly at high speeds.
401831-01
(Option: With EDS)
The EDS (Electronic Damping System) can be used to tune the suspension individually
without the use of tools.
Always adapt the suspension to your riding style and the payload.
In the "Load" menu, the suspension can be set to the payload.
In the "Damping" menu, the damping behavior of the suspension can be set.
12.4 Adjusting the compression damping of the fork (Option: Without EDS)
Info
The hydraulic compression damping determines the fork suspension behavior.
To Next Page
Loading...
Need help?
General
