MAINTENANCE WORK ON FRAME AND ENGINE 111
Info
The standard adjustment is the setting that provides the best vehicle handling.
When the fork is compressed, the suspension setting changes, causing the vehi-
cle to become more stable but also more difficult to handle.
100694-11
– Tighten screw .
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
– Tighten screws .
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)
– Tighten screw .
Guideline
Screw, handlebar stub M8 20 Nm
(14.8 lbf ft)
– Repeat the adjustment on the other fork leg.
Info
The vehicle level setting on both fork legs must be identical.
To Next Page
Loading...
Need help?
General
