KTM 1190 RC8 R EU/UK 2009 User Manual

CONTROLS 64
– Press the MODE button briefly.
The settings are stored and the display changes to the SET‑UP menu.
– Press the button briefly and repeatedly until the symbol shows EXIT SETUP in the
info display.
– Press the MODE button briefly.
5.46Adjusting shift speed RPM1/2
Condition
The ignition is on.
The motorcycle is upright.
400460-01
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol shows SETTINGS in the info display.
– Press the MODE button briefly.
– Press the MODE button briefly.
RPM1and RPM2 appear on the info display.
The engine speed after RPM1 flashes.
Info
The engine speed can be set at intervals of 50.
RPM1 is the engine speed above which the shift warning light starts to flash.
– Set the engine speed with the button or the button .
– Press the MODE button briefly.
The engine speed after RPM2 flashes.

KTM 1190 RC8 R EU/UK 2009 Specifications

General

Brand	KTM
Model	1190 RC8 R EU/UK 2009
Category	Motorcycle
Language	English