MAINTENANCE WORK ON FRAME AND ENGINE 169
9.64Adjusting headlamp range
– Check the headlamp setting. ( p. 168)
100748-10
– Adjust the beam distance of the headlight by turning screw .
Guideline
A motorcycle with rider, including the luggage and a passenger (where applicable)
the light cut off must be aligned exactly on the lower mark (when checking headlight
adjustment).
Info
Turn clockwise to increase the light range, turn counterclockwise to reduce the
light range.
If you have a payload, you may have to correct the headlight range.
9.65Activating/deactivating ignition key
Info
The orange programming key must only be used for activating and deactivating!
If a black ignition key is lost or replaced, the black ignition keys must be activated/deactivated using the orange programming key.
This will also prevent the vehicle from being operated without authorization with the lost black ignition key.
You can activate or deactivate up to four black ignition keys. Only the black ignition keys trained during an activation procedure are
valid. All black ignition keys not trained in the activation procedure are invalid, but can be retrained in a further activation proce-
dure.
To Next Page
Loading...
Need help?
General
