KTM 125 SX 2023 User Manual

11 SERVICE WORK ON THE CHASSIS
52
S05332-10
Main work
–
Remove screw
1
. Detach the wiring harness.
–
Remove screw
2
.
–
Remove screw
3
.
– Take off the upper triple clamp with the handlebar and place
to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables or lines.
S05333-10
–
Remove steering head seal
4
.
– Remove the lower triple clamp with steering stem.
– Remove the upper steering head bearing.
11.10 Installing the lower triple clamp
A01192-10
Main work
– Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease ( p. 140)
– Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on steering head seal
1
.
S05332-11
– Position the upper triple clamp and handlebar.
–
Mount screw
2
, but do not tighten it yet.
Guideline
Screw, top steering
head
M20x1.5 12 Nm (8.9 lbf ft)

KTM 125 SX 2023 Specifications

General

Brand	KTM
Model	125 SX 2023
Category	Motorcycle
Language	English