11 SERVICE WORK ON THE CHASSIS
62
11.25 Installing the engine guard (125 XC US)
S05562-11
– Position the engine guard on the frame.
–
Mount screws
1
, but do not tighten yet.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Mount screws
2
with bushings, but do not tighten yet.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
The engine guard is directed evenly toward the front.
– Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
11.26 Removing the air filter box cover
S05540-10
Condition
The air filter box cover is secured.
–
Remove screw
1
.
S05541-10
–
Pull off the air filter box cover in area
A
and push it side-
ways and forward. Take off the air filter box cover.
Condition
The air filter box cover is not secured.
–
Pull off the air filter box cover in area
A
and push it side-
ways and forward. Take off the air filter box cover.
To Next Page
Loading...
Need help?
General
