SERVICE WORK ON THE CHASSIS 11
57
11.17 Installing the front fender
S05339-10
Main work
–
Position the front fender. Mount and tighten screws
1
and
2
.
Guideline
Screw, fender M6 12 Nm (8.9 lbf ft)
Finishing work
– Install the start number plate. ( p. 56)
11.18 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 48)
– Remove the frame protector. ( p. 61)
– Remove the main silencer. ( p. 67)
S05341-11
Main work
–
Remove screw
1
.
–
Remove fitting
2
.
Info
Raise the swingarm slightly to be able to remove the
screws more easily.
S05537-10
–
Remove screws
3
.
– Pull off foot brake cylinder from the push rod.
To Next Page
Loading...
Need help?
General
