11 SERVICE WORK ON THE CHASSIS
56
11.14 Removing the start number plate
S05336-10
–
Remove screw
1
.
– Unhook the start number plate from the brake line and remove
it.
11.15 Installing the start number plate
S05337-10
–
Position the brake line in holders
A
on the start number
plate.
–
Position the start number plate. Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis
EJOT PT
K60x25
2 Nm (1.5 lbf ft)
The holding lugs engage in the fender.
11.16 Removing front fender
Preparatory work
– Remove the start number plate. ( p. 56)
S05339-10
Main work
–
Remove screws
1
and
2
. Remove front fender.
To Next Page
Loading...
Need help?
General
