KTM 125 SX EU User Manual

11 SERVICE WORK ON THE CHASSIS 47
11.15 Greasing the steering head bearing x
800010-10
–
Remove the lower triple clamp. x ( p. 43)
–
Install the lower triple clamp. x ( p. 44)
11.16 Removing the start number plate
101680-10
– Remove screw 1 and take off the clamp.
– Remove screw 2. Take off the start number plate.
11.17 Installing the start number plate
101681-10
– Position the start number plate. Mount and tighten screw 1.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Ensure that the holding lugs engage in the fender.
– Position the brake line. Position the clamp and mount and tighten screw 2.
11.18 Removing the front fender
Preparatory work
– Remove the start number plate. ( p. 47)
101724-10
Main work
– Remove screws 1 and 2. Remove the front fender.

KTM 125 SX EU Specifications

General

Brand	KTM
Model	125 SX EU
Category	Motorcycle
Language	English