KTM 1290 SUPERDUKE R User Manual

13 SERVICE WORK ON THE CHASSIS 113
L01489-01
– Check the chain sliding piece for wear.
» If the lower edge of the chain pins is in line with or below the chain sliding piece:
– Change the chain sliding piece.
– Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
– Tighten the screw on the chain sliding piece.
Guideline
Remaining screws, chassis M8 25 Nm
(18.4 lbf ft)
13.17 Checking/correcting the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch facing discs.
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.

KTM 1290 SUPERDUKE R Specifications

General

Brand	KTM
Model	1290 SUPERDUKE R
Category	Motorcycle
Language	English