7 COMBINATION INSTRUMENT 56
7.9.8 "Heating" (optional)
402434-02
– Press UP or DOWN button until the "Heating" menu appears on the matrix display. Press-
ing the SET button opens the menu.
– Use the SET button to select a heating level or to switch off the heated grips.
7.9.9 "MTC/ABS"
L01436-10
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "MTC/ABS" menu appears on the matrix display.
In the "MTC/ABS" menu, "MTC" and "ABS" can be switched off.
In "ABS Mode", a choice can be made between "Road" and "SUP MOT".
Info
After the ignition is switched on, traction control and ABS are enabled again.
In the "ROAD" ABS mode, the ABS controls both wheels.
In the "SUP MOT" ABS mode, the ABS only controls the front wheel. There is no ABS
intervention on the rear wheel. The ABS lamp flashes slowly to remind you that the
"SUP MOT" ABS mode is enabled.
In the "SUP MOT" ABS mode, the rear wheel may block and there is a risk of crash-
ing.
To Next Page
Loading...
Need help?
General
