14 ELECTRICAL SYSTEM 115
B00751-10
–
Pull back the positive terminal cover
3
.
–
Disconnect positive cable
4
from the battery.
–
Detach rubber band
5
.
– Pull the battery up and out of the battery holder.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
14.2 Installing the battery
B00751-11
Main work
– Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
Battery (FTZ-9) ( p. 164)
–
Reconnect rubber band
1
.
–
Position the positive cable
2
and mount and tighten the screw.
–
Position positive terminal cover
3
.
To Next Page
Loading...
Need help?
General
