17 SERVICE WORK ON THE ENGINE 148
B00773-11
–
Remove filler plug
7
and the O-ring from the clutch cover, and fill up with engine oil.
Engine oil 1.5 l (1.6 qt.) External temper-
ature: 0… 50 °C
(32… 122 °F)
Engine oil
(SAE 15W/50)
( p. 172)
External tempera-
ture: −10… 40 °C
(14… 104 °F)
Engine oil
(SAE 10W/40)
( p. 172)
– Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
– Always make sure there is sufficient ventilation when running the engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
– Fit the front spoiler. ( p. 93)
– Check the engine oil level. ( p. 145)
17.3 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
To Next Page
Loading...
Need help?
General
