17 SERVICE WORK ON THE ENGINE 147
B00775-10
–
Remove screws
3
. Remove oil filter cover
4
with the O-ring.
–
Pull oil filter
5
out of the oil filter housing.
Circlip pliers reverse (51012011000)
– Completely drain the engine oil.
– Thoroughly clean the parts and sealing surface.
B00776-10
–
Insert oil filter
5
.
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover
6
.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 8 Nm (5.9 lbf ft)
Screw, oil filter cover M6 12 Nm (8.9 lbf ft)
Info
Too little engine oil or poor-quality engine oil results in premature wear of the
engine.
To Next Page
Loading...
