17 SERVICE WORK ON THE ENGINE 145
17.1 Checking the engine oil level
Condition
The engine is at operating temperature.
Preparatory work
– Stand the motorcycle upright on a horizontal surface.
S00685-10
Main work
– Check the engine oil level.
Info
After switching off the engine, wait one minute before checking the level.
The engine oil must be between the markings
A
and
B
.
»
If the engine oil is below the marking
A
:
– Add the engine oil. ( p. 148)
»
If the engine oil is above the marking
B
:
– Correct the engine oil level.
17.2 Changing the engine oil and oil filter, cleaning the oil screen
Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
– Wear suitable protective clothing and safety gloves.
– In the event of scalding, rinse the area affected immediately with lukewarm water.
To Next Page
Need help?
General
