14 ELECTRICAL SYSTEM 118
M00729-10
Main work
– Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test rest potential and start potential of the bat-
tery, and to test the alternator. With this device, you cannot overcharge the battery.
Info
Never remove lid
1
.
Charge the battery with a maximum of 10% of the capacity specified on battery
housing
2
.
– Switch off the battery charger after charging and disconnect from the battery.
Guideline
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
– Position the negative cable and mount and tighten the screw.
– Position the negative terminal cover.
Finishing work
– Mount the seat. ( p. 82)
– Mount the passenger seat. ( p. 81)
– Set the clock. ( p. 47)
To Next Page
Loading...
Need help?
General
