KTM 200 DUKE EU - Page 147

17 SERVICE WORK ON THE ENGINE 145
Info
Drain the engine oil only when the engine is warm.
Preparatory work
– Remove the front spoiler. ( p. 90)
– Stand the motorcycle on its side stand on a horizontal surface.
B00774-10
Main work
– Place a suitable container under the engine.
– Remove the oil drain plug 1 with the O-ring.
– Remove oil screen 2 with the O-ring.
– Completely drain the engine oil.
– Clean the oil drain plug and oil screen thoroughly.
– Position oil screen 2 and mount and tighten oil drain plug 1 with the O-ring.
Guideline
Oil drain plug (125 Duke) M24x1.5 15 Nm
(11.1 lbf ft)
Oil drain plug (200 Duke EU/MAL) M24x1.5 15 Nm
(11.1 lbf ft)