12 BRAKE SYSTEM 97
B00739-10
– Check the brake linings for minimum thickness A.
Minimum thickness A ≥ 1 mm (≥ 0.04 in)
» If the minimum thickness is less than specified:
–
Change the front brake linings. x
– Check the brake linings for damage and cracking.
» If there is wear or tearing:
–
Change the front brake linings. x
12.6 Checking the free travel of foot brake lever
Warning
Danger of accidents Brake system failure.
– If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust the free travel on foot brake lever according to specifications.
To Next Page
Loading...
Need help?
General
